Hand Tools

2,000+ products

Expected delivery: Tue, Nov 17

The hand tools maintenance techs, mechanics and trades reach for every day: wrenches and hex keys, sockets and ratchets, screwdrivers and nut drivers, pliers and cutters, hammers, bars and chisels, knives and blades, clamps and vises and tool storage. Purchasing teams use this section to outfit new hires, replace worn tools and restock the tool crib.

Use the size filters to find inch (SAE) or metric sizes.

How to choose hand tools

Know your fastener sizes. Most plants and fleets run a mix of SAE and metric hardware. Check the thread sizes guide if you're unsure which you're working with.
Match drive size to the job. 1/4 in. drive suits small fasteners in tight spaces, 3/8 in. covers general maintenance, and 1/2 in. and larger handle heavier bolts. Use impact-rated sockets only on impact tools.
Pick the right point count. 6-point sockets and box ends grip the flats and are less likely to round a worn head. 12-point gives more angles in tight spots.
Check for insulated or specialty ratings. Insulated tools are marked for electrical work, but they do not replace your electrical safety program or NFPA 70E procedures.
Buy sets for coverage, singles for replacement. A set fills a new toolbox quickly; open stock replaces the one size that walked away.
Plan storage too. Toolboxes, bags and organizers cut down on lost tools.

Outfitting a crew or a new service truck? Send a list for a quote, or open a business account so techs can order on terms under one billing setup.

Common questions

What's the difference between SAE and metric wrenches?

SAE wrenches are sized in fractions of an inch and metric wrenches in millimeters. Some sizes are close but not interchangeable, and using the wrong one can round off a fastener.

Should I buy 6-point or 12-point sockets?

For general maintenance and stubborn or rusted bolts, 6-point is the safer choice because it grips the flats. 12-point sockets help where swing room is limited or on 12-point fasteners.

Do you sell tools for a complete tool crib?

Yes. We supply hand tools, power tools and measuring tools for cribs and service trucks, and can help with bulk orders.

Hand Tools by type

Hand Tools: page 5

Grey Pneumatic 1" Drive x 1-9/16" Heavyduty Universal SKU 914-4050U $137.76
Grey Pneumatic 1" Drive x 15/16" Heavyduty Universal SKU 914-4030U $120.98
Grey Pneumatic 1" Drive x 27mm Heavy Duty Universal SKU 914-4027UM $120.98
Grey Pneumatic 1" Drive x 35mm Extra-Deep Thin-Wall SKU 914-4035MDT $54.35
Stanley 1" Fatmax Short Blade Chisel SKU LS-00582700-6 $27.47
Milwaukee 1-1/2 In. Scraper Blade SKU 495-49-01-5463 $10.87
Stanley 1-1/2" Fatmax Short Blade Chisel SKU LS-00582702-2 $33.78
DeWalt 1-1/8 Cordless D-Handledust Extractor SKU 115-DWH205DH $320.47
Milwaukee 1-1/8 In. Hex 16 in. Narrow Chisel SKU 495-48-62-4006 $46.75
Facom 1-15/16 Spanner Hook Precision CR SKU 575-FA-115A.50 $154.78
Approved Vendor 1-7/8 Inch Combination Wrench SKU 13630 $109.74
Approved Vendor 1-7/8 Inch Service Wrench SKU 13631 $57.11
Approved Vendor 1-9/16 Inch Combination Wrench SKU 13697 $82.37
Approved Vendor 1-9/16 Inch Service Wrench SKU 13698 $50.79
Proto 1/2 DR 15PC SAE 6PT SKU 577-54115S $274.82/pack of 15
Proto 1/2 DR 18PC SAE 12PT SKU 577-54118T $331.52/pack of 18
Proto 1/2 DR 18PC SAE 6PT SKU 577-54118S $335.17/pack of 18
Proto 1/2 DR 3 PC Extension Set SKU 577-54111 $51.33/pack of 3
Proto 1/2 DR 41PC SAE & mm 12PT Aero SKU 577-54341AS $775.00/pack of 41
Proto 1/2 DR Torque Wrench 16-80 ft lb Certified SKU 577-6008CXCERT $344.50
Approved Vendor 1/2 Inch Angle Head Open End Wrench SKU 13858 $24.34
Approved Vendor 1/2 Inch Combination Wrench SKU 13861 $14.87
Approved Vendor 1/2 Inch Drive 17 x 19 mm Deep Thin Wall Impact Flip Socket SKU 13867 $16.97
Approved Vendor 1/2 Inch Drive 19 x 21 mm Deep Thin Wall Impact Flip Socket SKU 13868 $18.03
Approved Vendor 1/2 Inch Drive 21 x 22 mm Deep Thin Wall Impact Flip Socket SKU 13869 $19.08
Approved Vendor 1/2 Inch Drive 90-Tooth Flex Head Dual-Direction Electronic Torque Wrench (30 - 300 ft-lb) SKU 13876 $395.00
Approved Vendor 1/2 Inch Drive Impact Universal Joint SKU 13877 $21.18
Approved Vendor 1/2 Inch Drive x 1 Inch Shallow 12-Point Socket SKU 13887 $15.92
Approved Vendor 1/2 Inch Drive x 1 Inch Shallow 6-Point Socket SKU 13889 $15.92
Approved Vendor 1/2 Inch Drive x 1-1/16 Inch Shallow 12-Point Socket SKU 13895 $15.92
Approved Vendor 1/2 Inch Drive x 1-1/16 Inch Shallow 6-Point Socket SKU 13897 $15.92
Approved Vendor 1/2 Inch Drive x 1-1/4 Inch Shallow 6-Point Socket SKU 13913 $16.97
Approved Vendor 1/2 Inch Drive x 1-1/8 Inch Shallow 12-Point Socket SKU 13919 $15.92
Approved Vendor 1/2 Inch Drive x 1-1/8 Inch Shallow 6-Point Socket SKU 13921 $15.92
Approved Vendor 1/2 Inch Drive x 1-3/16 Inch Shallow 12-Point Socket SKU 13933 $16.97
Approved Vendor 1/2 Inch Drive x 1-3/16 Inch Shallow 6-Point Socket SKU 13935 $16.97
Approved Vendor 1/2 Inch Drive x 1-3/8 Inch Shallow 12-Point Socket SKU 13941 $19.08
Approved Vendor 1/2 Inch Drive x 1-5/16 Inch Shallow 6-Point Socket SKU 13949 $18.03
Approved Vendor 1/2 Inch Drive x 1-7/16 Inch Shallow 12-Point Socket SKU 13955 $19.08
Approved Vendor 1/2 Inch Drive x 1-7/16 Inch Shallow 6-Point Socket SKU 13957 $19.08
Approved Vendor 1/2 Inch Drive x 1/2 Inch Deep 12-Point Socket SKU 13963 $13.82
Approved Vendor 1/2 Inch Drive x 1/2 Inch Deep 6-Point Socket SKU 13965 $13.82
Approved Vendor 1/2 Inch Drive x 1/2 Inch Shallow 6-Point Socket SKU 13971 $12.76
Approved Vendor 1/2 Inch Drive x 10 mm Deep 12-Point Socket SKU 13980 $13.82
Approved Vendor 1/2 Inch Drive x 10 mm Deep 6-Point Socket SKU 13982 $13.82
Approved Vendor 1/2 Inch Drive x 10 mm Shallow 12-Point Socket SKU 13986 $12.76
Approved Vendor 1/2 Inch Drive x 10 mm Shallow 6-Point Socket SKU 13988 $12.76
Approved Vendor 1/2 Inch Drive x 10-1/2 Inch Flex Head Non-Quick-Release Comfort Grip Ratchet SKU 13989 $75.00