Hand Tools

2,000+ products

Expected delivery: Tue, Nov 17

The hand tools maintenance techs, mechanics and trades reach for every day: wrenches and hex keys, sockets and ratchets, screwdrivers and nut drivers, pliers and cutters, hammers, bars and chisels, knives and blades, clamps and vises and tool storage. Purchasing teams use this section to outfit new hires, replace worn tools and restock the tool crib.

Use the size filters to find inch (SAE) or metric sizes.

How to choose hand tools

• Know your fastener sizes. Most plants and fleets run a mix of SAE and metric hardware. Check the thread sizes guide if you're unsure which you're working with.
• Match drive size to the job. 1/4 in. drive suits small fasteners in tight spaces, 3/8 in. covers general maintenance, and 1/2 in. and larger handle heavier bolts. Use impact-rated sockets only on impact tools.
• Pick the right point count. 6-point sockets and box ends grip the flats and are less likely to round a worn head. 12-point gives more angles in tight spots.
• Check for insulated or specialty ratings. Insulated tools are marked for electrical work, but they do not replace your electrical safety program or NFPA 70E procedures.
• Buy sets for coverage, singles for replacement. A set fills a new toolbox quickly; open stock replaces the one size that walked away.
• Plan storage too. Toolboxes, bags and organizers cut down on lost tools.

Outfitting a crew or a new service truck? Send a list for a quote, or open a business account so techs can order on terms under one billing setup.

Common questions

What's the difference between SAE and metric wrenches?

SAE wrenches are sized in fractions of an inch and metric wrenches in millimeters. Some sizes are close but not interchangeable, and using the wrong one can round off a fastener.

Should I buy 6-point or 12-point sockets?

For general maintenance and stubborn or rusted bolts, 6-point is the safer choice because it grips the flats. 12-point sockets help where swing room is limited or on 12-point fasteners.

Do you sell tools for a complete tool crib?

Yes. We supply hand tools, power tools and measuring tools for cribs and service trucks, and can help with bulk orders.

Hand Tools by type

• Sockets & Ratchets 1,000+
• Wrenches & Hex Keys 400+
• Pliers & Cutters 100+
• Hammers, Bars & Chisels 100+
• Tool Storage & Organizers 70+
• Specialty Hand Tools 50+
• Clamps & Vises 40+
• Screwdrivers & Nut Drivers 40+
• Knives, Blades & Scissors 20+
• Other Hand Tools 6+

Hand Tools: page 16

• Proto 1/4DR 12PT STD Unvimp SKT 9mm SKU 577-66509MP $28.69
• Proto 1/4DR 9PC Imp SKT Set 12PT Reg SKU 577-62133M $254.87/pack of 9
• Proto 1/4DR Impact Univ JOINT1/4 SKU 577-66170P $28.71
• Proto 1/4in DR STD Round Headblack SKU 577-4752FBL $38.34
• Alfa Tool 1/4X3/8X2 Pin Hex Socket Extension SKU SE062 $5.76
• Alfa Tool 1/4X3/8X3 Pin Hex Socket Extension SKU SE064 $6.74
• Alfa Tool 1/4X3/8X4 Pin Hex Socket Extension SKU SE064A $6.94
• Alfa Tool 1/4X3/8X6 Pin Hex Socket Extension SKU SE064B $8.72
• Approved Vendor 1/8 Inch Flat End Hex T-Handle Key SKU 17465 $14.87
• Box Partners 10 1/8 x 4 3/4" Stack & Hang Bin Dividers 6/Case SKU BIND105 $23.80/pack of 6
• Box Partners 10 7/8 x 5 1/2 x 5" Black Conductive Bin Boxes 12 Bins/Cs SKU BINC111 $406.80/pack of 12
• Irwin 10 In. Slidelock Straight Jaw Pliers SKU 586-DWHT82822 $33.84
• Approved Vendor 10 Inch Curved Jaw Locking Pliers SKU 17694 $25.39
• Approved Vendor 10 Inch Deep Bite Round Jaw Locking Pliers SKU 17695 $26.45
• Approved Vendor 10 Inch Straight Jaw Locking Pliers SKU 17699 $25.39
• Approved Vendor 10 mm Combination Wrench SKU 17704 $13.82
• Approved Vendor 10 mm Flat End Hex T-Handle Key SKU 17706 $21.18
• Proto 10 MM Socket 3/8" Drive SKU 577-4990-10MST $19.97
• Approved Vendor 10 mm Stubby Combination Wrench SKU 17713 $12.76
• Box Partners 10 x 12" Open End Static Shielding Bags 100/Case SKU STC160 $64.38/pack of 100
• Irwin 10" Cast Iron Pipe Wrench SKU 586-274101 $31.29
• DeWalt 10" Cold Chisel SKU 115-DW5350 $15.81
• Irwin 10" Crimper Forge w/Protouch Grip SKU 586-2078310 $32.82
• Proto 10" Curve Locking Plier SKU 577-292NC $24.02
• Approved Vendor 10" Flat Smooth File SKU 17718 $10.82
• Anchor Brand 10" Heavy Duty Pipe Wrench Cast Iron SKU 103-01-310 $14.85
• Irwin 10" Straight Jaw Groovelock SKU 586-4935096 $21.80
• Proto 10-3/16" Power-Track Ii SKU 577-260SG $24.02
• Proto 10-PC 1/2DR. Metric Impa SKU 577-74212 $131.28
• Stanley 100 Plus 2 Point Phillip SKU LS-00620607-1 $10.15
• Irwin 1078KB 10-PC. Tool Setinkit Bag Contains One Eac SKU 586-1078KB $242.18
• Irwin 10CR Orig Curv Jaw 10" /250 mm - CRD Lock Plie SKU 586-4935576 $20.01
• Proto 10in Regular Duty C-Clamp SKU 577-410A $145.57
• Lenox 10in Vjaw Quick-Adjust Plier SKU 433-LXHT90551 $31.52
• DeWalt 10mm + 13mm Double-Ended/Detachable Nut Driver SKU 115-DWADEND1013MM $14.11
• Milwaukee 10mm Hollowcore Magneticnut Driver SKU 495-48-22-2566 $24.43
• Milwaukee 10mm Hollowcore Nut Driver SKU 495-48-22-2466 $23.19
• Stanley 10oz Dead Blow Hammer SKU LS-00537215-6 $54.15
• Proto 10PC WR Set RCH SPL mm-Teth SKU 577-SCRM-10S-TT $386.55/pack of 10
• Proto 10PC. Socket Set 3/8" Drive SKU 577-52123 $79.21/pack of 10
• Box Partners 11 5/8 x 4 1/8 x 4" Blue Plastic Shelf Bin Boxes 36 Bins/Cs SKU BINPS102B $124.80/pack of 36
• Box Partners 11 5/8 x 4 1/8 x 4" Clear Plastic Shelf Bin Boxes 36 Bins/Cs SKU BINPS101CL $165.60/pack of 36
• Approved Vendor 11 mm Combination Wrench SKU 17798 $13.82
• Approved Vendor 11 mm Reversible 12-Point Ratcheting Combination Wrench SKU 17802 $25.39
• Approved Vendor 11 mm Stubby Combination Wrench SKU 17803 $12.76
• Proto 11 PC Tool Roll New VBL SKU 577-25TR58C $36.31/pack of 11
• Proto 11-PC. 1/2DR. Impact Soc SKU 577-74112 $173.90
• Approved Vendor 11-Tool Angle Head Wrench Holder (Black, 1/4-3/4 in.) SKU 17817 $19.08