Hand Tools

2,000+ products

Expected delivery: Tue, Nov 17

The hand tools maintenance techs, mechanics and trades reach for every day: wrenches and hex keys, sockets and ratchets, screwdrivers and nut drivers, pliers and cutters, hammers, bars and chisels, knives and blades, clamps and vises and tool storage. Purchasing teams use this section to outfit new hires, replace worn tools and restock the tool crib.

Use the size filters to find inch (SAE) or metric sizes.

How to choose hand tools

• Know your fastener sizes. Most plants and fleets run a mix of SAE and metric hardware. Check the thread sizes guide if you're unsure which you're working with.
• Match drive size to the job. 1/4 in. drive suits small fasteners in tight spaces, 3/8 in. covers general maintenance, and 1/2 in. and larger handle heavier bolts. Use impact-rated sockets only on impact tools.
• Pick the right point count. 6-point sockets and box ends grip the flats and are less likely to round a worn head. 12-point gives more angles in tight spots.
• Check for insulated or specialty ratings. Insulated tools are marked for electrical work, but they do not replace your electrical safety program or NFPA 70E procedures.
• Buy sets for coverage, singles for replacement. A set fills a new toolbox quickly; open stock replaces the one size that walked away.
• Plan storage too. Toolboxes, bags and organizers cut down on lost tools.

Outfitting a crew or a new service truck? Send a list for a quote, or open a business account so techs can order on terms under one billing setup.

Common questions

What's the difference between SAE and metric wrenches?

SAE wrenches are sized in fractions of an inch and metric wrenches in millimeters. Some sizes are close but not interchangeable, and using the wrong one can round off a fastener.

Should I buy 6-point or 12-point sockets?

For general maintenance and stubborn or rusted bolts, 6-point is the safer choice because it grips the flats. 12-point sockets help where swing room is limited or on 12-point fasteners.

Do you sell tools for a complete tool crib?

Yes. We supply hand tools, power tools and measuring tools for cribs and service trucks, and can help with bulk orders.

Hand Tools by type

• Sockets & Ratchets 1,000+
• Wrenches & Hex Keys 400+
• Pliers & Cutters 100+
• Hammers, Bars & Chisels 100+
• Tool Storage & Organizers 70+
• Specialty Hand Tools 50+
• Clamps & Vises 40+
• Screwdrivers & Nut Drivers 40+
• Knives, Blades & Scissors 20+
• Other Hand Tools 6+

Hand Tools: page 21

• Approved Vendor 21 mm Reversible 12-Point Ratcheting Combination Wrench SKU 19425 $33.82
• Approved Vendor 21 mm Service Wrench SKU 19426 $26.45
• Approved Vendor 21 oz. Dead Blow Hammer SKU 19429 $45.53
• Box Partners 21 x 23 mm 45-Degree Offset Box End Wrench SKU 19430 $27.50
• Approved Vendor 22 mm Angle Head Open End Wrench SKU 19532 $32.76
• Approved Vendor 22 mm Combination Wrench SKU 19533 $22.24
• Approved Vendor 22 mm Flex Head 12-Point Ratcheting Combination Wrench SKU 19534 $33.82
• Box Partners 22 mm Long Fixed/Flex Head 12-Point Ratcheting Box End Wrench SKU 19535 $57.11
• Approved Vendor 22 mm Reversible 12-Point Ratcheting Combination Wrench SKU 19536 $33.82
• Approved Vendor 22 mm Service Wrench SKU 19537 $27.50
• Proto 22 PC Combo Reverse Ratchet Wrench 12 pt Metric SKU 577-SCVMT-22S $867.04/pack of 22
• Proto 22 Piece Wrench Set Rchspl mm SKU 577-SCVM-22S $1,123.22
• Proto 22-PC 1/2DR Deep Metric SKU 577-54201 $409.94
• Ridgid 226 Pipe Cutter SKU LS-00670393-9 $1,465.68
• Approved Vendor 23 mm Angle Head Open End Wrench SKU 19545 $36.97
• Approved Vendor 23 mm Flex Head 12-Point Ratcheting Combination Wrench SKU 19547 $46.58
• Box Partners 23 mm Long Fixed/Flex Head 12-Point Ratcheting Box End Wrench SKU 19548 $57.11
• Approved Vendor 23 mm Reversible 12-Point Ratcheting Combination Wrench SKU 19549 $46.58
• Approved Vendor 23 mm Service Wrench SKU 19550 $28.55
• Proto 23-PC 1/2DR Metric Socke SKU 577-54209 $261.89
• Proto 233 PCS. Master Inter Maint. Tool Set SKU 577-99820 $3,691.66/pack of 233
• Approved Vendor 24 mm Angle Head Open End Wrench SKU 19655 $36.97
• Approved Vendor 24 mm Combination Wrench SKU 19656 $23.29
• Approved Vendor 24 mm Flex Head 12-Point Ratcheting Combination Wrench SKU 19657 $50.79
• Box Partners 24 mm Long Fixed/Flex Head 12-Point Ratcheting Box End Wrench SKU 19658 $61.32
• Approved Vendor 24 mm Reversible 12-Point Ratcheting Combination Wrench SKU 19659 $50.79
• Approved Vendor 24 mm Service Wrench SKU 19660 $29.61
• Anchor Brand 24" Aluminum Pipe Wrench SKU 103-01-624 $64.44
• Anchor Brand 24" Bolt Cutter Center Cut SKU 103-39-024 $45.79
• Irwin 24" Cast Aluminum Pipewrench SKU 586-2074124 $72.98
• Aviditi 24" Double Roll Horizontal Paper Cutter SKU KP24DHDIS $251.51
• Proto 24oz Ball Peen Hammer SKU 577-1324AVP $42.96
• Proto 24PC. 12PT 1/2DR Metric SKU 577-54211 $302.06/pack of 24
• Stanley 25 Compartment Pro Organizer SKU LS-00619887-9 $45.83
• Approved Vendor 25 Inch Angled End Handled Pry Bar SKU 19677 $35.92
• Approved Vendor 25 mm Angle Head Open End Wrench SKU 19678 $46.58
• Approved Vendor 25 mm Combination Wrench SKU 19679 $25.39
• Approved Vendor 25 mm Service Wrench SKU 19680 $30.66
• Approved Vendor 25 oz. Ball Peen Hammer SKU 19681 $67.63
• Approved Vendor 26 mm Angle Head Open End Wrench SKU 19775 $46.58
• Approved Vendor 26 mm Combination Wrench SKU 19776 $25.39
• Approved Vendor 26 mm Service Wrench SKU 19777 $31.71
• Approved Vendor 26 oz. Dead Blow Hammer SKU 19779 $51.84
• Approved Vendor 26 oz. Flat Steel Face Dead Blow Hammer SKU 19780 $72.89
• Proto 26 Piece Punch and Chisel Set SKU 577-46S2 $303.32
• Approved Vendor 27 mm Angle Head Open End Wrench SKU 19787 $46.58
• Approved Vendor 27 mm Combination Wrench SKU 19788 $27.50
• Approved Vendor 27 mm Service Wrench SKU 19789 $32.76