Hand Tools

2,000+ products

Expected delivery: Tue, Nov 17

The hand tools maintenance techs, mechanics and trades reach for every day: wrenches and hex keys, sockets and ratchets, screwdrivers and nut drivers, pliers and cutters, hammers, bars and chisels, knives and blades, clamps and vises and tool storage. Purchasing teams use this section to outfit new hires, replace worn tools and restock the tool crib.

Use the size filters to find inch (SAE) or metric sizes.

How to choose hand tools

• Know your fastener sizes. Most plants and fleets run a mix of SAE and metric hardware. Check the thread sizes guide if you're unsure which you're working with.
• Match drive size to the job. 1/4 in. drive suits small fasteners in tight spaces, 3/8 in. covers general maintenance, and 1/2 in. and larger handle heavier bolts. Use impact-rated sockets only on impact tools.
• Pick the right point count. 6-point sockets and box ends grip the flats and are less likely to round a worn head. 12-point gives more angles in tight spots.
• Check for insulated or specialty ratings. Insulated tools are marked for electrical work, but they do not replace your electrical safety program or NFPA 70E procedures.
• Buy sets for coverage, singles for replacement. A set fills a new toolbox quickly; open stock replaces the one size that walked away.
• Plan storage too. Toolboxes, bags and organizers cut down on lost tools.

Outfitting a crew or a new service truck? Send a list for a quote, or open a business account so techs can order on terms under one billing setup.

Common questions

What's the difference between SAE and metric wrenches?

SAE wrenches are sized in fractions of an inch and metric wrenches in millimeters. Some sizes are close but not interchangeable, and using the wrong one can round off a fastener.

Should I buy 6-point or 12-point sockets?

For general maintenance and stubborn or rusted bolts, 6-point is the safer choice because it grips the flats. 12-point sockets help where swing room is limited or on 12-point fasteners.

Do you sell tools for a complete tool crib?

Yes. We supply hand tools, power tools and measuring tools for cribs and service trucks, and can help with bulk orders.

Hand Tools by type

• Sockets & Ratchets 1,000+
• Wrenches & Hex Keys 400+
• Pliers & Cutters 100+
• Hammers, Bars & Chisels 100+
• Tool Storage & Organizers 70+
• Specialty Hand Tools 50+
• Clamps & Vises 40+
• Screwdrivers & Nut Drivers 40+
• Knives, Blades & Scissors 20+
• Other Hand Tools 6+

Hand Tools: page 32

• Proto 3/8DR Imp Unv SKT 6PT 3/8 SKU 577-77273P $32.19
• Proto 3/8in DR Inter SKT 9mm 12 PTX SKU 577-5209MN $7.24
• Proto 3/8in P90 Ratchet Repairkit SKU 577-52HTCFRK $16.73
• Proto 3/8X10in Keystone Roundbar SKU 577-K3810RF $17.34
• Proto 3/8X12in Keystone Roundbar SKU 577-K3812RF $19.07
• Approved Vendor 30 mm Angle Head Open End Wrench SKU 23379 $52.89
• Approved Vendor 30 mm Combination Wrench SKU 23380 $32.76
• Approved Vendor 30 mm Service Wrench SKU 23381 $33.82
• Box Partners 30 x 24" Open End Static Shielding Bags 100/Case SKU STC211 $375.16/pack of 100
• Box Partners 30 x 32 mm 45-Degree Offset Box End Wrench SKU 23382 $31.71
• Proto 30in Wrkstn 6 DRW Black SKU 577-563042-6BK $4,134.73
• Approved Vendor 31 mm Angle Head Open End Wrench SKU 23394 $57.11
• Approved Vendor 31 mm Combination Wrench SKU 23395 $34.87
• Approved Vendor 31 mm Service Wrench SKU 23396 $34.87
• Coilhose Pneumatics 31430 Blue Plastic Tubing Cutter SKU 166-PXC058B $12.91
• Approved Vendor 32 mm Angle Head Open End Wrench SKU 23493 $59.21
• Approved Vendor 32 mm Combination Wrench SKU 23494 $34.87
• Approved Vendor 32 mm Service Wrench SKU 23495 $35.92
• Approved Vendor 32 oz. Ball Peen Hammer SKU 23496 $78.16
• Approved Vendor 32 oz. Dead Blow Piston Hammer SKU 23497 $67.63
• Proto 32" Carpenters SKU 577-9979-NA $132.84
• Proto 32oz Ball Peen Hammer SKU 577-1332AVP $46.77
• Approved Vendor 33 mm Angle Head Open End Wrench SKU 23501 $65.53
• Approved Vendor 33 mm Combination Wrench SKU 23502 $52.89
• Approved Vendor 33 mm Service Wrench SKU 23503 $36.97
• Approved Vendor 34 mm Angle Head Open End Wrench SKU 23536 $69.74
• Approved Vendor 34 mm Combination Wrench SKU 23537 $52.89
• Approved Vendor 34 mm Service Wrench SKU 23538 $45.53
• Approved Vendor 35 mm Angle Head Open End Wrench SKU 23547 $73.95
• Approved Vendor 35 mm Service Wrench SKU 23549 $46.58
• Approved Vendor 36 mm Angle Head Open End Wrench SKU 23591 $78.16
• Approved Vendor 36 mm Service Wrench SKU 23593 $46.58
• Approved Vendor 36 oz. Flat Steel Face Dead Blow Hammer SKU 23595 $78.16
• Box Partners 36" Vertical Roll Paper Cutter SKU KP36VDIS $323.09
• Irwin 36in Med Duty F Clamp SKU 586-1825767 $35.46
• Approved Vendor 37 mm Angle Head Open End Wrench SKU 23600 $83.42
• Approved Vendor 37 mm Service Wrench SKU 23602 $47.63
• Approved Vendor 38 mm Angle Head Open End Wrench SKU 23633 $88.68
• Approved Vendor 38 mm Service Wrench SKU 23635 $48.68
• Approved Vendor 39 oz. Dead Blow Hammer SKU 23638 $59.21
• Proto 3in Regular Duty C-Clamp SKU 577-403A $34.00
• 3M Ratchet Headgear H8A 82501-00000 SKU 247-82501-00000 $39.48
• Milwaukee 3PC 1/4 Drive Locking Extension Set SKU 495-48-22-9360 $116.68/pack of 3
• Proto 3PC Ball Peen Hammer SET(32/40/8oz) SKU 577-1303AVPS $151.90/pack of 32
• Irwin 3PC Groovelock Tray Set SKU 586-2078710 $81.84/pack of 3
• Proto 3PC Set Brass Punch SKU 577-9633B $78.51/pack of 3
• Irwin 4 Piece Pro Plier Tray Set (6"DIAG./Slip 8"LN/10 SKU 586-2078707 $62.89
• Box Partners 4 x 6" Open End Static Shielding Bags 1000/Case SKU STC111 $162.86/pack of 1000