Hand Tools

2,000+ products

Expected delivery: Tue, Nov 17

The hand tools maintenance techs, mechanics and trades reach for every day: wrenches and hex keys, sockets and ratchets, screwdrivers and nut drivers, pliers and cutters, hammers, bars and chisels, knives and blades, clamps and vises and tool storage. Purchasing teams use this section to outfit new hires, replace worn tools and restock the tool crib.

Use the size filters to find inch (SAE) or metric sizes.

How to choose hand tools

Know your fastener sizes. Most plants and fleets run a mix of SAE and metric hardware. Check the thread sizes guide if you're unsure which you're working with.
Match drive size to the job. 1/4 in. drive suits small fasteners in tight spaces, 3/8 in. covers general maintenance, and 1/2 in. and larger handle heavier bolts. Use impact-rated sockets only on impact tools.
Pick the right point count. 6-point sockets and box ends grip the flats and are less likely to round a worn head. 12-point gives more angles in tight spots.
Check for insulated or specialty ratings. Insulated tools are marked for electrical work, but they do not replace your electrical safety program or NFPA 70E procedures.
Buy sets for coverage, singles for replacement. A set fills a new toolbox quickly; open stock replaces the one size that walked away.
Plan storage too. Toolboxes, bags and organizers cut down on lost tools.

Outfitting a crew or a new service truck? Send a list for a quote, or open a business account so techs can order on terms under one billing setup.

Common questions

What's the difference between SAE and metric wrenches?

SAE wrenches are sized in fractions of an inch and metric wrenches in millimeters. Some sizes are close but not interchangeable, and using the wrong one can round off a fastener.

Should I buy 6-point or 12-point sockets?

For general maintenance and stubborn or rusted bolts, 6-point is the safer choice because it grips the flats. 12-point sockets help where swing room is limited or on 12-point fasteners.

Do you sell tools for a complete tool crib?

Yes. We supply hand tools, power tools and measuring tools for cribs and service trucks, and can help with bulk orders.

Hand Tools by type

Hand Tools: page 22

Box Partners 27" Vertical Roll Paper Cutter SKU KP27VDIS $273.23
Proto 27in 5 Drawer Short Topdesert Tan SKU 577-STV2720CS05DT $1,174.38
Proto 27in 7 Drawer Top Chestdesert Tan SKU 577-STV2728CS07DT $1,335.53
Approved Vendor 28 mm Angle Head Open End Wrench SKU 19877 $48.68
Approved Vendor 28 mm Service Wrench SKU 19879 $32.76
Approved Vendor 29 mm Angle Head Open End Wrench SKU 19895 $48.68
Approved Vendor 29 mm Service Wrench SKU 19897 $33.82
Proto 3 - 3/8DR Imp Lock Ext SKU 577-7203L $26.56
Approved Vendor 3 mm Flat End Hex T-Handle Key SKU 20000 $14.87
DeWalt 3"X12" Scaling Chisel 3/4" Hex x 21/32" Round SP SKU 115-DW5775 $59.65
Approved Vendor 3/16 Inch Flat End Hex T-Handle Key SKU 20140 $16.97
Approved Vendor 3/32 Inch Flat End Hex T-Handle Key SKU 20403 $13.82
Proto 3/4 DR Torque Wrench 60-300 ft lb Certified SKU 577-6018CXCERT $979.58
Approved Vendor 3/4 Inch Angle Head Open End Wrench SKU 20496 $28.55
Approved Vendor 3/4 Inch Cold Chisel SKU 20497 $19.08
Approved Vendor 3/4 Inch Combination Wrench SKU 20498 $18.03
Approved Vendor 3/4 Inch Drive x 1 Inch Shallow 6-Point Socket SKU 20509 $19.08
Approved Vendor 3/4 Inch Drive x 1-1/16 Inch Shallow 12-Point Socket SKU 20511 $20.13
Approved Vendor 3/4 Inch Drive x 1-1/16 Inch Shallow 6-Point Socket SKU 20513 $20.13
Approved Vendor 3/4 Inch Drive x 1-1/2 Inch Shallow 12-Point Socket SKU 20515 $25.39
Approved Vendor 3/4 Inch Drive x 1-1/2 Inch Shallow 6-Point Socket SKU 20517 $25.39
Approved Vendor 3/4 Inch Drive x 1-1/4 Inch Deep 6-Point Socket SKU 20518 $27.50
Approved Vendor 3/4 Inch Drive x 1-1/4 Inch Shallow 12-Point Socket SKU 20519 $22.24
Approved Vendor 3/4 Inch Drive x 1-1/4 Inch Shallow 6-Point Socket SKU 20521 $22.24
Approved Vendor 3/4 Inch Drive x 1-1/8 Inch Shallow 12-Point Socket SKU 20523 $21.18
Approved Vendor 3/4 Inch Drive x 1-1/8 Inch Shallow 6-Point Socket SKU 20525 $21.18
Approved Vendor 3/4 Inch Drive x 1-11/16 Inch Deep 6-Point Socket SKU 20526 $35.92
Approved Vendor 3/4 Inch Drive x 1-11/16 Inch Shallow 12-Point Socket SKU 20527 $27.50
Approved Vendor 3/4 Inch Drive x 1-11/16 Inch Shallow 6-Point Socket SKU 20529 $27.50
Approved Vendor 3/4 Inch Drive x 1-13/16 Inch Shallow 12-Point Socket SKU 20531 $28.55
Approved Vendor 3/4 Inch Drive x 1-13/16 Inch Shallow 6-Point Socket SKU 20533 $28.55
Approved Vendor 3/4 Inch Drive x 1-15/16 Inch Shallow 12-Point Socket SKU 20535 $30.66
Approved Vendor 3/4 Inch Drive x 1-3/16 Inch Deep 6-Point Socket SKU 20538 $25.39
Approved Vendor 3/4 Inch Drive x 1-3/16 Inch Shallow 12-Point Socket SKU 20539 $21.18
Approved Vendor 3/4 Inch Drive x 1-3/16 Inch Shallow 6-Point Socket SKU 20541 $21.18
Approved Vendor 3/4 Inch Drive x 1-3/4 Inch Shallow 12-Point Socket SKU 20543 $27.50
Approved Vendor 3/4 Inch Drive x 1-3/8 Inch Shallow 12-Point Socket SKU 20547 $24.34
Approved Vendor 3/4 Inch Drive x 1-3/8 Inch Shallow 6-Point Socket SKU 20549 $24.34
Approved Vendor 3/4 Inch Drive x 1-5/16 Inch Shallow 12-Point Socket SKU 20551 $23.29
Approved Vendor 3/4 Inch Drive x 1-5/16 Inch Shallow 6-Point Socket SKU 20553 $23.29
Approved Vendor 3/4 Inch Drive x 1-5/8 Inch Deep 6-Point Socket SKU 20554 $33.82
Approved Vendor 3/4 Inch Drive x 1-5/8 Inch Shallow 12-Point Socket SKU 20555 $26.45
Approved Vendor 3/4 Inch Drive x 1-5/8 Inch Shallow 6-Point Socket SKU 20557 $26.45
Approved Vendor 3/4 Inch Drive x 1-7/16 Inch Shallow 12-Point Socket SKU 20559 $24.34
Approved Vendor 3/4 Inch Drive x 1-7/16 Inch Shallow 6-Point Socket SKU 20561 $24.34
Approved Vendor 3/4 Inch Drive x 1-7/8 Inch Shallow 12-Point Socket SKU 20563 $28.55
Approved Vendor 3/4 Inch Drive x 1-9/16 Inch Shallow 12-Point Socket SKU 20567 $26.45
Approved Vendor 3/4 Inch Drive x 1-9/16 Inch Shallow 6-Point Socket SKU 20569 $26.45