Hand Tools

2,000+ products

Expected delivery: Tue, Nov 17

The hand tools maintenance techs, mechanics and trades reach for every day: wrenches and hex keys, sockets and ratchets, screwdrivers and nut drivers, pliers and cutters, hammers, bars and chisels, knives and blades, clamps and vises and tool storage. Purchasing teams use this section to outfit new hires, replace worn tools and restock the tool crib.

Use the size filters to find inch (SAE) or metric sizes.

How to choose hand tools

Know your fastener sizes. Most plants and fleets run a mix of SAE and metric hardware. Check the thread sizes guide if you're unsure which you're working with.
Match drive size to the job. 1/4 in. drive suits small fasteners in tight spaces, 3/8 in. covers general maintenance, and 1/2 in. and larger handle heavier bolts. Use impact-rated sockets only on impact tools.
Pick the right point count. 6-point sockets and box ends grip the flats and are less likely to round a worn head. 12-point gives more angles in tight spots.
Check for insulated or specialty ratings. Insulated tools are marked for electrical work, but they do not replace your electrical safety program or NFPA 70E procedures.
Buy sets for coverage, singles for replacement. A set fills a new toolbox quickly; open stock replaces the one size that walked away.
Plan storage too. Toolboxes, bags and organizers cut down on lost tools.

Outfitting a crew or a new service truck? Send a list for a quote, or open a business account so techs can order on terms under one billing setup.

Common questions

What's the difference between SAE and metric wrenches?

SAE wrenches are sized in fractions of an inch and metric wrenches in millimeters. Some sizes are close but not interchangeable, and using the wrong one can round off a fastener.

Should I buy 6-point or 12-point sockets?

For general maintenance and stubborn or rusted bolts, 6-point is the safer choice because it grips the flats. 12-point sockets help where swing room is limited or on 12-point fasteners.

Do you sell tools for a complete tool crib?

Yes. We supply hand tools, power tools and measuring tools for cribs and service trucks, and can help with bulk orders.

Hand Tools by type

Hand Tools: page 19

Approved Vendor 15/16 Inch Angle Head Open End Wrench SKU 18532 $36.97
Approved Vendor 15/16 Inch Combination Wrench SKU 18533 $23.29
Approved Vendor 15/16 Inch Flex Head 12-Point Ratcheting Combination Wrench SKU 18534 $50.79
Milwaukee 15/16 Inch Hawg Cutter SKU 495-49-57-0939 $110.04
Box Partners 15/16 Inch Long Fixed/Flex Head 12-Point Ratcheting Box End Wrench SKU 18535 $61.32
Approved Vendor 15/16 Inch Reversible 12-Point Ratcheting Combination Wrench SKU 18536 $50.79
Approved Vendor 15/16 Inch Service Wrench SKU 18537 $29.61
Proto 15/16in 6 pt FP Combo WR SKU 577-1230H-T500 $35.11
Approved Vendor 152 oz. Short Handle Dead Blow Sledge Hammer SKU 18744 $167.63
Proto 15PC Set 1/2DR SAE DP Thin Wall Imp SKU 577-74117 $240.05/pack of 15
Approved Vendor 16 mm Angle Head Open End Wrench SKU 18760 $26.45
Approved Vendor 16 mm Combination Wrench SKU 18761 $15.92
Approved Vendor 16 mm Flex Head 12-Point Ratcheting Combination Wrench SKU 18763 $28.55
Box Partners 16 mm Long Fixed/Flex Head 12-Point Ratcheting Box End Wrench SKU 18764 $36.97
Approved Vendor 16 mm Reversible 12-Point Ratcheting Combination Wrench SKU 18765 $28.55
Approved Vendor 16 mm Stubby Combination Wrench SKU 18766 $14.87
Irwin 16 Oz Fiberglass Generalpurpose Hammer SKU 586-1954889 $23.39
Approved Vendor 16 oz. Ball Peen Hammer SKU 18767 $57.11
Box Partners 16 x 18 mm 45-Degree Offset Box End Wrench SKU 18770 $23.29
DeWalt 16" Asphalt Cutter SKU 115-DW5846 $85.93
Approved Vendor 16-Tool Angle Head Wrench Holder (Red) SKU 18776 $19.08
Proto 164 PCS. Master Inter Maint. Set SKU 577-99490 $2,841.27/pack of 164
Proto 16oz Ball Peen Hammer SKU 577-1316AVP $42.80
Proto 16oz Ball Pein Hammer-Teth SKU 577-1316AVP-TT $62.45
Facom 16PC 15-75 Angle Open End Wrench Set SKU 575-FM-34.JL16T $267.55/pack of 16
Box Partners 17 7/8 x 6 5/8 x 4" Clear Plastic Shelf Bin Boxes 20 Bins/Cs SKU BINPS112CL $176.00/pack of 20
Approved Vendor 17 Inch Angled End Handled Pry Bar SKU 18793 $27.50
Approved Vendor 17 mm Angle Head Open End Wrench SKU 18794 $26.45
Approved Vendor 17 mm Flex Head 12-Point Ratcheting Combination Wrench SKU 18797 $28.55
Box Partners 17 mm Long Fixed/Flex Head 12-Point Ratcheting Box End Wrench SKU 18798 $36.97
Approved Vendor 17 mm Reversible 12-Point Ratcheting Combination Wrench SKU 18799 $28.55
Approved Vendor 17 mm Stubby Combination Wrench SKU 18800 $15.92
Box Partners 17 x 19 mm Long Flex Head 12-Point Ratcheting Box End Wrench SKU 18802 $57.11
Box Partners 17 x 8 1/4" Stack & Hang Bin Dividers 6/Case SKU BIND146 $56.20/pack of 6
Approved Vendor 17-Tool 3/8 Inch Drive Crowfoot Wrench Organizer Rack, Red (8 - 24 mm) SKU 18806 $19.08
Proto 179 PCS Master Tech Toolset SKU 577-99900 $2,754.12/pack of 179
Approved Vendor 18 mm Angle Head Open End Wrench SKU 18923 $28.55
Approved Vendor 18 mm Flex Head 12-Point Ratcheting Combination Wrench SKU 18926 $28.55
Box Partners 18 mm Long Fixed/Flex Head 12-Point Ratcheting Box End Wrench SKU 18927 $48.68
Approved Vendor 18 mm Reversible 12-Point Ratcheting Combination Wrench SKU 18928 $28.55
Approved Vendor 18 mm Stubby Combination Wrench SKU 18929 $15.92
Stanley 18 Oz. Rubber Mallet SKU LS-00670990-3 $32.16
Box Partners 18 x 16 1/2 x 11" Black Conductive Bin Boxes 3 Bins/Cs SKU BINC113 $846.80/pack of 3
3M 18 x 24" Open End Static Shielding Bags 100/Case SKU STC198 $192.84/pack of 100
Irwin 18" Cast Aluminum Pipewrench SKU 586-2074118 $63.65
Anchor Brand 18" Heavy Duty Pipe Wrench Cast Iron SKU 103-01-318 $36.11
Milwaukee 18" Wrecking Bar SKU 495-48-22-9070 $34.53
Irwin 18in Wrecking Bar SKU 586-IWHT55180 $44.52