Hand Tools

2,000+ products

Expected delivery: Tue, Nov 17

The hand tools maintenance techs, mechanics and trades reach for every day: wrenches and hex keys, sockets and ratchets, screwdrivers and nut drivers, pliers and cutters, hammers, bars and chisels, knives and blades, clamps and vises and tool storage. Purchasing teams use this section to outfit new hires, replace worn tools and restock the tool crib.

Use the size filters to find inch (SAE) or metric sizes.

How to choose hand tools

• Know your fastener sizes. Most plants and fleets run a mix of SAE and metric hardware. Check the thread sizes guide if you're unsure which you're working with.
• Match drive size to the job. 1/4 in. drive suits small fasteners in tight spaces, 3/8 in. covers general maintenance, and 1/2 in. and larger handle heavier bolts. Use impact-rated sockets only on impact tools.
• Pick the right point count. 6-point sockets and box ends grip the flats and are less likely to round a worn head. 12-point gives more angles in tight spots.
• Check for insulated or specialty ratings. Insulated tools are marked for electrical work, but they do not replace your electrical safety program or NFPA 70E procedures.
• Buy sets for coverage, singles for replacement. A set fills a new toolbox quickly; open stock replaces the one size that walked away.
• Plan storage too. Toolboxes, bags and organizers cut down on lost tools.

Outfitting a crew or a new service truck? Send a list for a quote, or open a business account so techs can order on terms under one billing setup.

Common questions

What's the difference between SAE and metric wrenches?

SAE wrenches are sized in fractions of an inch and metric wrenches in millimeters. Some sizes are close but not interchangeable, and using the wrong one can round off a fastener.

Should I buy 6-point or 12-point sockets?

For general maintenance and stubborn or rusted bolts, 6-point is the safer choice because it grips the flats. 12-point sockets help where swing room is limited or on 12-point fasteners.

Do you sell tools for a complete tool crib?

Yes. We supply hand tools, power tools and measuring tools for cribs and service trucks, and can help with bulk orders.

Hand Tools by type

• Sockets & Ratchets 1,000+
• Wrenches & Hex Keys 400+
• Pliers & Cutters 100+
• Hammers, Bars & Chisels 100+
• Tool Storage & Organizers 70+
• Specialty Hand Tools 50+
• Clamps & Vises 40+
• Screwdrivers & Nut Drivers 40+
• Knives, Blades & Scissors 20+
• Other Hand Tools 6+

Hand Tools: page 20

• Proto 18PC SAE Ratcheting Combo WR ST SKU 577-SCV-18SB $1,028.76/pack of 18
• Approved Vendor 19 mm Angle Head Open End Wrench SKU 18954 $28.55
• Approved Vendor 19 mm Combination Wrench SKU 18955 $18.03
• Approved Vendor 19 mm Flex Head 12-Point Ratcheting Combination Wrench SKU 18957 $30.66
• Box Partners 19 mm Long Fixed/Flex Head 12-Point Ratcheting Box End Wrench SKU 18958 $48.68
• Approved Vendor 19 mm Reversible 12-Point Ratcheting Combination Wrench SKU 18959 $30.66
• Approved Vendor 19 mm Service Wrench SKU 18960 $26.45
• Approved Vendor 19 mm Stubby Combination Wrench SKU 18961 $16.97
• Approved Vendor 2 Inch Combination Wrench SKU 19081 $109.74
• Milwaukee 2 Inch Hawg Cutter SKU 495-49-57-2002 $263.93
• Approved Vendor 2 Inch Service Wrench SKU 19082 $60.26
• Approved Vendor 2 mm Flat End Hex T-Handle Key SKU 19086 $13.82
• Irwin 2 PC Groove Joint Set SKU 585-1773639 $21.32/pack of 2
• Irwin 2" New Handi Clamp SKU 586-1799212 $10.23
• DeWalt 2"X17"X22" 4 Cutter Spline Shank Rotary HMR Bit SKU 115-DW5769 $459.99
• Approved Vendor 2-1/16 Inch Service Wrench SKU 19169 $62.37
• Approved Vendor 2-1/2 Inch Service Wrench SKU 19183 $73.95
• Approved Vendor 2-1/4 Inch Service Wrench SKU 19206 $67.63
• Approved Vendor 2-1/8 Inch Service Wrench SKU 19228 $63.42
• Approved Vendor 2-3/16 Inch Service Wrench SKU 19261 $65.53
• Approved Vendor 2-3/8 Inch Service Wrench SKU 19282 $69.74
• Approved Vendor 2-5/16 Inch Service Wrench SKU 19301 $69.74
• Approved Vendor 2-5/8 Inch Service Wrench SKU 19310 $78.16
• Approved Vendor 2-7/16 Inch Service Wrench SKU 19323 $71.84
• Milwaukee 2-9/16 In. Mag Nut Driver 1/4 in. SKU 495-49-66-4732 $4.84
• Approved Vendor 2-9/16 Inch Service Wrench SKU 19343 $76.05
• Milwaukee 2-N-1 Insulated Flip Shank Multi-Bit Screwdriver SKU 495-48-22-2201 $46.87
• Approved Vendor 2.5 mm Flat End Hex T-Handle Key SKU 19368 $13.82
• Proto 2.75 X 2 Long Shrink Loop SKU 577-P2R275X2LPOR $12.21
• Approved Vendor 20 mm Angle Head Open End Wrench SKU 19391 $30.66
• Approved Vendor 20 mm Combination Wrench SKU 19392 $20.13
• Approved Vendor 20 mm Flex Head 12-Point Ratcheting Combination Wrench SKU 19393 $33.82
• Box Partners 20 mm Long Fixed/Flex Head 12-Point Ratcheting Box End Wrench SKU 19394 $57.11
• Approved Vendor 20 mm Reversible 12-Point Ratcheting Combination Wrench SKU 19395 $33.82
• Approved Vendor 20 mm Service Wrench SKU 19396 $26.45
• Irwin 20 Oz Steel General Purpose Hammer SKU 586-1954888 $48.32
• Proto 20 PC Crowfoot Set SKU 577-49000 $579.40/pack of 20
• Irwin 20" Universal Handsaw SKU 586-1773466 $46.05
• Lenox 2012 Medium Tension Hacksaw Frame NA SKU 433-1805722 $22.21
• Lenox 20975 Frames 975 Mini Hacksaw SKU 433-20975975 $13.88
• Proto 20PC mm Ratchetg Combo WR Set Musa SKU 577-SCVM-20SB $986.99/pack of 20
• Irwin 20SL Offset Snip Cuts Straight and Left Angles SKU 586-2073211 $22.96
• DeWalt 20V Max 1/2 HT Imct Wrench Kit SKU 115-DCF900P1 $510.75
• DeWalt 20V Pruner Bare SKU 115-DCPR320B $176.41
• Irwin 21 In Flat Bar SKU 586-IWHT55210 $31.77
• Approved Vendor 21 mm Angle Head Open End Wrench SKU 19421 $30.66
• Approved Vendor 21 mm Flex Head 12-Point Ratcheting Combination Wrench SKU 19423 $33.82
• Box Partners 21 mm Long Fixed/Flex Head 12-Point Ratcheting Box End Wrench SKU 19424 $57.11