Hydraulic Hose & Fittings

70+ products

Expected delivery: Wed, Nov 18

Hydraulic hose and fittings for loaders, dump bodies, lifts, presses and plant equipment. This subcategory covers wire-braided and spiral hydraulic hose built to SAE 100R ratings, crimp and field-attachable hose ends, adapters in JIC 37 degree flare, O-ring face seal (ORFS), NPT and SAE O-ring boss threads, hydraulic quick couplers, dust caps and plugs, and hose guards.

What to check before you order

  • Hose size and rating. Hydraulic hose is sized by inside diameter, often written as a dash size in sixteenths of an inch (for example, -8 is 1/2 in.). Its working pressure must meet or exceed the system's maximum.
  • Thread and seal type. Identify each port before ordering. JIC, ORFS, NPT and O-ring boss threads do not seal with one another, even when sizes look close. A thread gauge and caliper help.
  • Fluid and temperature. Check that the hose is compatible with the hydraulic fluid and rated for the operating temperature.
  • Matched components. Crimp fittings should be used with the hose and crimper they are made for, following the manufacturer's instructions.

Hydraulic fluid can inject through skin at high pressure. Relieve pressure before working on lines and follow your site's safety program and lockout procedures. Replacement O-rings are in seals, O-rings and gaskets, and the full category is hydraulics and pneumatics. To match an old hose assembly, send a quote request.

Common questions

How do I identify a hydraulic fitting thread?

Check the seal first: JIC seals on a 37 degree flare, ORFS on a flat face with an O-ring, NPT on a tapered thread, and O-ring boss with an O-ring at the base. Then measure diameter and pitch.

What do SAE 100R hose ratings mean?

They are hose types defined in SAE J517. 100R1 has one wire braid and 100R2 has two. The type, size and working pressure are printed on the hose layline.

Popular hydraulic hose & fittings

More in Hydraulics & Pneumatics