Cutting Tools & Machining

9,000+ products

Expected delivery: Wed, Nov 18

Cutting tools for maintenance shops, fabricators and machine shops: drill bits in high-speed steel, cobalt and carbide, taps and dies for inch and metric threads, end mills and inserts, hole saws and annular cutters, countersinks, reamers and burs and saw blades. Maintenance techs, contractors and machinists all use this range.

How to choose cutting tools

• Match the tool material to the workpiece. High-speed steel (HSS) covers general drilling in mild steel, aluminum and wood. Cobalt HSS holds its edge in stainless and harder alloys. Solid carbide runs faster and lasts longer in rigid machines, but it is brittle in a hand drill. Our guide to drill bits by material explains coatings, point angles and lengths.
• Use the right point angle. A 118 degree point is common for general-purpose work. A 135 degree split point starts without a center punch and suits harder metals.
• Size the tap drill before you tap. Each thread size has a matching tap drill, and the wrong one breaks taps or strips threads. See how to read thread sizes and our taps and dies.
• Control speed and heat. Harder materials and larger diameters need slower speeds. Use cutting fluid on steel and stainless, found under oils and cutting fluids.
• Pick the right hole-making tool. Twist drills suit small holes, step drills suit thin sheet, and hole saws or annular cutters suit large holes.

We carry the Alfa Tool line of drill bits, taps, end mills, countersinks and hole saws. For production tooling, a recurring tool crib order or part numbers you don't see online, ask for a quote. Shops that go through bits every week can set up vendor managed inventory so bins are counted and refilled on a schedule.

Common questions

What drill bit should I use for stainless steel?

A cobalt drill bit with a 135 degree split point is a common choice. Run it at a low speed with steady pressure and cutting oil, so the bit keeps cutting and does not work-harden the steel.

What is the difference between a plug tap and a bottoming tap?

A plug tap has a few tapered threads at the tip and is the general-purpose choice. A bottoming tap has almost no taper, so it cuts full threads close to the bottom of a blind hole after a plug tap has started the thread.

When should I use an annular cutter instead of a twist drill?

Annular cutters cut only a ring of metal and leave a solid slug, so they make large holes in steel faster and with less power. They are usually run in a magnetic drill press.

Cutting Tools & Machining by type

• Drill Bits 5,000+
• Taps & Dies 2,000+
• End Mills & Inserts 700+
• Countersinks, Reamers & Burs 500+
• Hole Saws & Annular Cutters 400+
• Saw Blades 100+
• Other Cutting Tools & Machining 1+

Cutting Tools & Machining: page 4

• Alfa Tool "T" Cobalt Split Point Jobber Drill SKU CO60220 $13.52
• Approved Vendor "T" HSS Black & Gold 135° Split Point Jobber Length Drill Bit SKU 6500 $21.33
• Approved Vendor "T" HSS Black Oxide 118° Standard Point Jobber Length Drill Bit SKU 6501 $10.16
• Approved Vendor "T" HSS Black Oxide 135° Split Point Jobber Length Drill Bit SKU 6502 $17.02
• Approved Vendor "T" HSS Cobalt 135° Split Point Jobber Length Drill Bit SKU 6503 $27.74
• Approved Vendor "T" HSS Polished 118° Standard Point Jobber Length Drill Bit SKU 6504 $18.58
• Alfa Tool "U" Cobalt Screw Machine Drill SKU SMCO60421 $14.66
• Alfa Tool "U" Cobalt Split Point Jobber Drill SKU CO60221 $13.52
• Approved Vendor "U" HSS Black & Gold 135° Split Point Jobber Length Drill Bit SKU 6505 $23.01
• Approved Vendor "U" HSS Black Oxide 118° Standard Point Jobber Length Drill Bit SKU 6506 $10.16
• Approved Vendor "U" HSS Black Oxide 135° Split Point Jobber Length Drill Bit SKU 6507 $18.23
• Approved Vendor "U" HSS Cobalt 135° Split Point Jobber Length Drill Bit SKU 6508 $27.74
• Approved Vendor "U" HSS Polished 118° Standard Point Jobber Length Drill Bit SKU 6509 $18.74
• Alfa Tool "V" Cobalt Screw Machine Drill SKU SMCO60422 $15.56
• Approved Vendor "V" HSS Black & Gold 135° Split Point Jobber Length Drill Bit SKU 6510 $23.01
• Approved Vendor "V" HSS Black Oxide 118° Standard Point Jobber Length Drill Bit SKU 6511 $10.41
• Approved Vendor "V" HSS Black Oxide 135° Split Point Jobber Length Drill Bit SKU 6512 $18.23
• Approved Vendor "V" HSS Cobalt 135° Split Point Jobber Length Drill Bit SKU 6513 $30.57
• Approved Vendor "V" HSS Polished 118° Standard Point Jobber Length Drill Bit SKU 6514 $19.33
• Alfa Tool "W" Cobalt Screw Machine Drill SKU SMCO60423 $16.22
• Approved Vendor "W" HSS Black & Gold 135° Split Point Jobber Length Drill Bit SKU 6515 $24.59
• Approved Vendor "W" HSS Black Oxide 118° Standard Point Jobber Length Drill Bit SKU 6516 $10.71
• Approved Vendor "W" HSS Black Oxide 135° Split Point Jobber Length Drill Bit SKU 6517 $19.50
• Alfa Tool "W" HSS Blitz Bit Jobber Length Drill SKU BB74223 $9.74
• Approved Vendor "W" HSS Cobalt 135° Split Point Jobber Length Drill Bit SKU 6518 $31.43
• Approved Vendor "W" HSS Polished 118° Standard Point Jobber Length Drill Bit SKU 6519 $20.58
• Alfa Tool "X" Cobalt Screw Machine Drill SKU SMCO60424 $17.98
• Approved Vendor "X" HSS Black & Gold 135° Split Point Jobber Length Drill Bit SKU 6520 $29.34
• Approved Vendor "X" HSS Black Oxide 118° Standard Point Jobber Length Drill Bit SKU 6521 $13.28
• Approved Vendor "X" HSS Black Oxide 135° Split Point Jobber Length Drill Bit SKU 6522 $22.62
• Alfa Tool "X" HSS Blitz Bit Jobber Length Drill SKU BB74224 $9.98
• Approved Vendor "X" HSS Cobalt 135° Split Point Jobber Length Drill Bit SKU 6523 $31.79
• Approved Vendor "X" HSS Polished 118° Standard Point Jobber Length Drill Bit SKU 6524 $21.18
• Alfa Tool "Y" Cobalt Screw Machine Drill SKU SMCO60425 $18.80
• Alfa Tool "Y" Cobalt Split Point Jobber Drill SKU CO60225 $17.50
• Approved Vendor "Y" HSS Black & Gold 135° Split Point Jobber Length Drill Bit SKU 6525 $31.22
• Approved Vendor "Y" HSS Black Oxide 118° Standard Point Jobber Length Drill Bit SKU 6526 $15.77
• Approved Vendor "Y" HSS Black Oxide 135° Split Point Jobber Length Drill Bit SKU 6527 $24.29
• Alfa Tool "Y" HSS Blitz Bit Jobber Length Drill SKU BB74225 $10.52
• Approved Vendor "Y" HSS Cobalt 135° Split Point Jobber Length Drill Bit SKU 6528 $33.64
• Approved Vendor "Y" HSS Polished 118° Standard Point Jobber Length Drill Bit SKU 6529 $25.69
• Alfa Tool "Z" Cobalt Screw Machine Drill SKU SMCO60426 $18.80
• Alfa Tool "Z" Cobalt Split Point Jobber Drill SKU CO60226 $17.82
• Approved Vendor "Z" HSS Black & Gold 135° Split Point Jobber Length Drill Bit SKU 6530 $33.67
• Approved Vendor "Z" HSS Black Oxide 118° Standard Point Jobber Length Drill Bit SKU 6531 $14.79
• Approved Vendor "Z" HSS Black Oxide 135° Split Point Jobber Length Drill Bit SKU 6532 $26.06
• Alfa Tool "Z" HSS Blitz Bit Jobber Length Drill SKU BB74226 $10.88
• Approved Vendor "Z" HSS Cobalt 135° Split Point Jobber Length Drill Bit SKU 6533 $36.54